Kc-hilites KC #6316 Add-on Harness for 2 Additional Lights In Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Kc-hilites KC #6316 Add-on Harness for 2 Additional Lights In. KC HiLiTES KC #6316 Add-on Harness for 2 Additional Lights Installation User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 1
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
This add-on harness, when used with an existing KC harness, will enable you to power
one or two additional lights with the switch on your existing harness.
1. Mount the relay within 6” of the relay on your existing light harness using one of the
screws enclosed.
2. With one of the screws enclosed, attach the ring terminal on the black ground wire to a
good clean metal grounded surface. (the relay mounting screw may be a good ground)
3. Run each of the red and black wire sets out to your two new additional KC lights and plug
the red wire into the red on the light and the black wire to the black on the light.
4. Using the enclosed wire splice, attach the 8” green wire from the add-on harness to the
green wire of the existing harness.
5. Attach the yellow power wire to the battery
or other 12 volt source.
6. Secure the wiring using the enclosed
wire ties.
7. Your done.
Installation Instructions
KC 6316 Add-on Harness
for 2 Additional Lights
KC HiLiTES, Inc., 2843 West Avenida de Luces, PO Box 155, Williams, AZ 86046 * 800-528-0950 * www.kchilites.com KC 3264V - rev 100604
23 Year Warranty
See details on our website at
www.kchilites.com
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
Zobrazit stránku 0
1

Shrnutí obsahu

Strany 1 - KC 6316 Add-on Harness

This add-on harness, when used with an existing KC harness, will enable you to power one or two additional lights with the switch on your existing har

Komentáře k této Příručce

Žádné komentáře